1head consist of 8 lines of 180 nozzles. 4 times as nlany as the conventional head. Totaling 1,440 nozzles.
Output capacity - in the case of using a practical image quality for short distance signboard (540 x 1,080 dpi). The time of 4 color printing : 40m² (430sq.ft.)/h*In the case of JV5-160S
▲ PAGETOP
JV5 can utilize four cartridges per color in 4-color mode. When the ink cartridge runs out, another cartridge begins supplying ink and helps prevent running out of ink. A maximum of 1,760cc ink per color can be loaded at one time.
The bulk ink system using ink packs of aluminum achieves as stable and reliable ink ejection as printing solely with cartridges. It is possible to use both 2-liter ink packs in combination with regular 220/440cc cartridges for colors that are not so often used. In-end detection function to prevent misprints without ink is also available.The bulk ink system is an eco-friendly ink system that produces less waste while achieving continuous printing.*MBIS=Mimaki Bulk Ink System
The thickness of the media is automatically detected and the height of the head is automatically adjusted to get the designated head gap. Even when the thickness of the media is changed, printing can be made with a constant head gap. This enables the user to always obtain the best printing results.
Head gap can be set step-less in 4 positions between 1.5 mm to 7 mm.
Monitoring ink-discharging state from the printing head and ink clogging is quickly detected and cleaned, saving the waste of media and ink.
Intelligent heater to enhance color development and to fix the ink by automatically heating the media to its proper temperature.(included as standard)
Equipped with a large-sized post-heater and drying fan, which promotes drying of the media printed at high speeds, thus enabling the winding.
User interface is easy to use, as the operating panel and heater lamp is placed in one place.
Control the odor of ink generated during printing. Equipped with exhaust fan and exhaust duct to quickly evacuate ink odors.