 These PVC Films are high gloss with excellent stability. They are soft in nature and will conform to curved or flat surfaces, which makes them superior for die cutting and flexible range of films. These films have a very high tack adhesive specifically formulated for banner graphics and lettering. They have a long-term 5 year outdoor durability for outdoor signage. APPLICATION WITH WATER ONLY. NOT TO BE USED WITH SOLVENT BASED APPLICATION FLUIDS.
Face Film -
3 mil high gloss, intermediate calendered vinyl film
Adhesive Release -
Aggressive, acrylic, permanent, pressure-sensitive.
Not to be used with solvent based application fluids
Liner -
78# (White) Bleached Kraft
Outdoor Durability -
5 years, mid-continental U.S., vertical.
Min Surface/Ambient Air Application Temp -
+ 35° F.
Application Surface -
Interior and exterior markings/decals requiring low cost and flexible products. e.g. original equipment markings.
Service Temp Range -
50°F. to +150°F. — Reasonable range of temperatures, which would be expected under normal environmental time and temperature conditions.
Opacity - Normal
Typical Film Caliper (w/adhesive) -
3.8 – 4.2 mils
Chemical Resistance - Good for most petroleum solvents and lower aliphatic alcohols. For ultimate solvent resistance, edge sealing is recommended.
Water Resistance - Excellent: Test piece aged 24 hrs. after application to stainless steel panel before testing. Not affected when immersed in 70°F water for seven days.
Adhesion -
50 oz/in.
Call 1-800-697-6523 for more information.
|
